| ENSAYO | NORMA | UNIDAD | GN-41 | GN-42 | GN-50 |
| MATERIA PRIMA | - |
- | HDPE | ||
| DENSIDAD POLIMERO | ASTM D 1505 |
G/CM3 | 0.94 | ||
| INDICE DE FLUIDEZ | ASTM D 1238 |
G/10MM | 0.45 | ||
| FORMA DE LA MALLA (long.)
(transv.) |
mm mm |
16 13 |
16 13 |
20 13 |
|
| CONTENIDO NEGRO HUMO | ASTM D 4218 | % | 2.0 | 2.0 | 2.0 |
| ESPESOR | ASTM D 5199 | mm | 3.90 | 4.24 | 5.00 |
| TRANSMISIBIDAD | ASTM D 4716 | cm/seg | 8.9 | 9.3 | 17 |
| RESISTENCIA TRACCIÓN | ASTM D 5035 | KN/m | 4.68 | 5.01 | 8.43 |
| COLOR | - | - | NEGRO | ||
GRAMAJE |
ASTM D 5261 | gr/m2 | 450 | 670 | 733 |
| DIMENSIÓN ROLLO | - | m | 2.18 X 110 | 2.18 X 95 | 2.18 X 90 |
| DIAMETRO ROLLO | - | m | 0.80 | 0.80 | 0.80 |